مقالات علمی چاپ شده در مجلات

1. "Heat Transfer enhancement and pressure drop performance of Al2O3 nanofluid in a laminar flow tube with deep dimples under constant heat flux: An experimental approach"
   Alireza Khashaei, Mohammad Ameri, Shahram Azizifar
   International Journal of Thermofluids, Vol. 24, 2024
2. "Optimization and exergoeconomic analyses of water-energy-carbon nexus in steel production: Integrating solar-biogas energy, wastewater treatment, and carbon capture"
   Leila Sasani gargari, Fatemeh Joda, Mohammad Ameri, Hossein Nami
   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 86, pp.275-292, 2024
3. "A year-round investigation of an integrated system based on reversible solid oxide cell"
   Zeinab Aghaziarati, Mohammad Ameri, Mokhtar Bidi
   ENERGY CONVERSION AND MANAGEMENT, Vol. 311, 2024
4. "Exergy based yearly performance analysis of a poly-generation system for a small-town application"
   Zeinab Aghaziarati, Mohammad Ameri, Mokhtar Bidi
   RENEWABLE ENERGY, Vol. 237, pp.121604-121618, 2024
5. "Experimental Exploration of Thermal Regulation in Li-ion Batteries Utilizing Liquid-Vapor Phase Transition in Direct Proximity to the Cells, in Combination with other BTMSs"
   Majid Goodarzi, Mohammad Ameri
   Journal of Renewable Energy and Environment, Vol. 12, pp.28-36, 2024
6. "Entropy generation analysis for printed circuit heat exchanger used in small-scale nitrogen expansion natural gas liquefaction refineries: Numerical approach"
   Mehdi Salmanpour, Mohammad Ameri, Sahand Majidi, Ali Jahangiri
   CHEMICAL ENGINEERING RESEARCH and DESIGN, Vol. 210, pp.393-406, 2024
7. "Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe"
   Gholamreza Ahmadi Sheikh Shabani, Ali Jahangiri, Mohammad Ameri, Davood Toghraie
   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, Vol. 149, pp.3735-3757, 2024
8. "A techno-economic assessment for the water-energy-carbon nexus based on the development of a mathematical model: In the iron and steel industry"
   Leila Sasani gargari, Fatemeh Joda, Mohammad Ameri
   Sustainable Energy Technologies and Assessments, Vol. 63, 2024
9. "Performance improvement of a double tube heat exchanger using novel electromagnetic vibration (EMV) method in the presence of Al2O3-water and CuO-water nanofluid; An experimental study"
   Nemat Mashoofi maleki, Saman Pourahmad, Ramin Haghighi Khoshkhoo, Mohammad Ameri
   ENERGY, Vol. 281, 2023
10. "Analysis of the effect of hot rotation cylinders on the enhancement of heat transfer in underfloor heating enclosures based on numerical and experimental results"
    Mojtaba Sedaghat, Ali Jahangiri, Mohammad Ameri, Ali J. Chamkha
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 188, 2023
11. "Scaling two-phase gas-liquid flow in horizontal pipes"
    MohammadAmin Tarahomi, Mohammad Emamzadeh, Mohammad Ameri
    CHEMICAL ENGINEERING RESEARCH and DESIGN, Vol. 200, pp.592-601, 2023
12. "Experimental investigation on the heat transfer augmentation and friction factor inside tube enhanced with deep dimples"
    Alireza Khashaei, Mohammad Ameri, Shahram Azizifar, Mohamad Hassan Cheraghi
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol. 149, pp.1-15, 2023
13. "Experimental study of Li-ion battery thermal management based on the liquid-vapor phase change in direct contact with the cells"
    Majid Goodarzi, Hamid Jannesari Ladani, Mohammad Ameri
    Journal of Energy Storage, Vol. 62, 2023
14. "Renewable energy system opportunities: A sustainable solution toward cleaner production and reducing carbon footprint of large-scale dairy farms"
    Ali Minoofar, Ashkan Gholami, Shahab Eslami, Arian Hejazizadeh, Aslan Gholami, Majid ZANDI, Mohammad Ameri, Hussein Kazem
    ENERGY CONVERSION AND MANAGEMENT, Vol. 293, pp.1-22, 2023
15. "Hydrodynamic and thermal entrance region assessment of turbulent flow through a circular tube with a tight-fit twisted tape insert, considering multifarious operating conditions and pitch ratios"
    Mahyar Seyd Eshaghi, Mohammad Ameri, Amin Rasam, Mokhtar Bidi
    Thermal Science and Engineering Progress, Vol. 38, 2023
16. "Impact of harsh weather conditions on solar photovoltaic cell temperature: Experimental analysis and thermal-optical modeling"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani, Saeed Jafarzadegan Gerashi , Hussein A Kazem, Ali H.A. Al-Waeli
    SOLAR ENERGY, Vol. 252, pp.176-194, 2023
17. "A fast and precise double-diode model for predicting photovoltaic panel electrical behavior in variable environmental conditions"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani, Maryam Gholami
    International Journal of Ambient Energy, Vol. 44, pp.1298-1315, 2023
18. "Experimental study of the thermal-frictional behavior of a horizontal straight tube equipped with a vibrating string turbulators: A novel active method"
    Nemat Mashoofi maleki, Mohammad Ameri, Ramin Haghighi Khoshkhoo
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol. 140, 2023
19. "Step-By-Step Guide to Model Photovoltaic Panels: An Up-To-Date Comparative Review Study"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani, Serge Pierfederici, Hussein A. Kazem
    IEEE Journal of Photovoltaics, Vol. 12, pp.915-928, 2022
20. "Predicting solar photovoltaic electrical output under variable environmental conditions: Modified semi-empirical correlations for dust"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani, Hussein A. Kazem
    Energy for Sustainable Development, Vol. 71, pp.389-405, 2022
21. "Experimental study of the effect of metal foams on subcooled flow boiling heat transfer of water and developing a correlation for predicting heat transfer"
    Shahram Azizifar, Mohammad Ameri, Iman Behroyan
    CHEMICAL ENGINEERING SCIENCE, Vol. 262, 2022
22. "Melting expedition in horizontal triplex tube heat exchangers via radial and combined radial-axial fins"
    Ali Moradian, Mohammad Ameri, Sahand Majidi
    Journal of Energy Storage, Vol. 56, 2022
23. "Experimental and numerical study of the thermal-frictional behavior of a horizontal heated tube equipped with a vibrating oscillator turbulator"
    Nemat Mashoofi maleki, Mohammad Ameri, Ramin Haghighi Khoshkhoo
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol. 135, 2022
24. "Electrical, thermal and optical modeling of photovoltaic systems: Step-by-step guide and comparative review study"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani
    Sustainable Energy Technologies and Assessments, Vol. 49, 2022
25. "CO2 capturing from flue gases injected into the NDDCT: Feasibility study, exergy and economic investigation of simultaneously MEA-solvent chemical absorption and flue gas injection"
    Atefeh Sharif, Ali Jahangiri, Mohammad Ameri
    Sustainable Energy Technologies and Assessments, Vol. 45, 2021
26. "Experimental investigation of the subcooled flow boiling heat transfer of water and nanofluids in a horizontal metal foam tube"
    Shahram Azizifar, Mohammad Ameri, Iman Behroyan
    HEAT AND MASS TRANSFER, Vol. 57, pp.1499-1511, 2021
27. "A single-diode model for photovoltaic panels in variable environmental conditions: Investigating dust impacts with experimental evaluation"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani
    Sustainable Energy Technologies and Assessments, Vol. 47, 2021
28. "Conceptual Design, exergoeconomic analysis and multi-objective optimization for a novel Integration of biomass-fueled power plant with MCFC-cryogenic CO2 separation unit for low-carbon power production"
    Ehsan Akrami, Mohammad Ameri, Matteo Rocco
    ENERGY, Vol. 227, 2021
29. "DUST ACCUMULATION ON PHOTOVOLTAIC MODULES: A REVIEW ON THE EFFECTIVE PARAMETERS"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani
    sigma journal of engineering and natural sciences, Vol. 39, pp.45-57, 2021
30. "Integration of biomass-fueled power plant and MCFC-cryogenic CO2 separation unit for low-carbon power production: Thermodynamic and exergoeconomic comparative analysis"
    Ehsan Akrami, Mohammad Ameri, Matteo Rocco
    ENERGY CONVERSION AND MANAGEMENT, Vol. 223, 2020
31. "Developing an Innovative Biomass-Based Power Plant for Low-Carbon Power Production Exergy and Exergoeconomic analyses"
    Ehsan Akrami, Mohammad Ameri, Matteo V. Rocco
    Thermal Science and Engineering Progress, Vol. 19, 2020
32. "A numerical assessment on heat transfer and flow characteristics of nanofluid in tubes enhanced with a variety of dimple configurations"
    AtaOllah Firoozi, Sahand Majidi, Mohammad Ameri
    Thermal Science and Engineering Progress, Vol. 19, 2020
33. "Photovoltaic Potential Assessment and Dust Impacts on Photovoltaic Systems in Iran Review Paper"
    Aslan Gholami, Mohammad Ameri, Majid ZANDI, Roghayeh Gavagsaz-ghoachani, Shahab Eslami, Serge Pierfederici
    IEEE Journal of Photovoltaics, Vol. 10, pp.824-837, 2020
34. "Thermodynamic and exergo-economic analyses of an innovative semi self-feeding energy system synchronized with waste-to-energy technology"
    Ehsan Akrami, Mohammad Ameri, Matteo Vincenzo Rocco, Francesco Davide Sanvito, Emanuela •Colombo
    Sustainable Energy Technologies and Assessments, Vol. 40, 2020
35. "An experimental study of subcooled flow boiling of water in the horizontal and vertical direction of a metal-foam tube"
    Shahram Azizifar, Mohammad Ameri, Iman Behroyan
    Thermal Science and Engineering Progress, Vol. 20, 2020
36. "Subcooled flow boiling of water in a metal-foam tube: An experimental study"
    Shahram Azizifar, Mohammad Ameri, Iman Behrooyan
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol. 118, 2020
37. "Interaction effects of natural draft dry cooling tower (NDDCT) performance and 4E (energy, exergy, economic and environmental) analysis of steam power plant under different climatic conditions"
    Reza Alizadeh kheneslu, Ali Jahangiri, Mohammad Ameri
    Sustainable Energy Technologies and Assessments, Vol. 37, 2020
38. "Numerical study on the heat transfer enhancement and pressure drop inside deep dimpled tubes"
    Mohamad Hassan Cheraghi, Mohammad Ameri, Mohammad Shahabadi farahani
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 147, 2020
39. "An improved semi-empirical friction model for gas-liquid two-phase flow in horizontal and near horizontal pipes"
    Mahdi Gharehasanlou, Mohammad Emamzadeh, Mohammad Ameri
    Theoretical and Applied Mechanics Letters, Vol. 10, pp.213-223, 2020
40. "performance assessment and leakage analysis of feed water pre-heaters in natural gas-fired steam power plants"
    Gholamreza Ahmadi Sheikh Shabani, Mohammad Ameri, Omidali Akbari, Alireza Seifi
    Journal of Power Technologies, Vol. 98, pp.352-364, 2018
41. "Hydrothermal assessment of ferrofluids in a metal foam tube under low-frequency magnetic field"
    Mohammad Amani, Mohammad Ameri, Alibakhsh Kasaeian
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 127, pp.242-251, 2018
42. "Thermodynamic thermoeconomic and life cycle assessment of a novel integrated solar combined cycle (ISCC) power plant"
    Mohammad Ameri,
    Sustainable Energy Technologies and Assessments, pp.192-205, 2018
43. "4E analyses and multi-objective optimization of different fuels application for a large combined cycle power plant"
    Mohammad Ameri, Hamid Mokhtari,
    ENERGY, pp.371-386, 2018
44. "Integrated an innovative energy system assessment by assisting solar energy for day and night time power generation Exergetic and Exergo-economic investigation"
    Ehsan Akrami, Aslan Gholami, Mohammad Ameri, Majid ZANDI
    ENERGY CONVERSION AND MANAGEMENT, Vol. 175, pp.21-32, 2018
45. "Exergy and thermal assessment of a Novel system utilizing flat plate collector with the application of nanofluid in porous media at a constant magnetic field"
    Mohammad Ameri,
    Thermal Science and Engineering Progress, Vol. 8, pp.223-235, 2018
46. "The Effect of Aperture Size on the Cavity Performance of Solar Thermoelectric Generator"
    Mohammad Ameri, Omid Farhangian Marandi, Behrooz Adelshahian
    Journal of Renewable Energy and Environment, Vol. 4, pp.39-46, 2018
47. "Modeling and analysis of a hybrid photovoltaic-thermoelectric solar cavity-receiver power generator"
    Omid Farhangian Marandi, Mohammad Ameri, Behrooz Adelshahian
    AUT Journal of Mechanical Engineering, Vol. 2, pp.277-288, 2018
48. "A multi-scenario zero-energy building techno-economic case study analysis for a renovation of a residential building"
    Mohammad Ameri, Arian Gerami
    Journal of Renewable Energy and Environment, Vol. 5, pp.10-26, 2018
49. "Optimum Exergoeconomic Modelling of Novel Hybrid Desalination System (MEDADRO)"
    Somayyeh Sadri, Ramin Haghighi Khoshkhoo, Mohammad Ameri
    ENERGY, Vol. 149, pp.74-83, 2018
50. "A new approach to thermo-economic modeling of adsorption desalination system"
    Somayyeh Sadri, Mohammad Ameri, Ramin Haghighi Khoshkhoo
    DESALINATION, Vol. 428, pp.69-75, 2018
51. "The experimental investigation of a hybrid photovoltaic-thermoelectric power generator solar cavity-receiver"
    Omid Farhangian Marandi, Mohammad Ameri, Behrooz Adelshahian
    SOLAR ENERGY, Vol. 161, pp.38-46, 2018
52. "Hydrothermal Characteristics of Spinel Manganese Ferrite Nanofluid in a Metal Foam Tube Modeling of Experimental Results using Artificial Neural Network"
    Mohammad Amani, Mohammad Ameri, Alibaksh Kasaeian
    HEAT TRANSFER ENGINEERING, pp.1-13, 2018
53. "Techno-Economic and Life-Cycle Cost Assessment of the CCHP/PV Hybrid System Application"
    Mohammad Ameri, Keivan Salimi
    Journal of Renewable Energy and Environment, Vol. 4, pp.1-8, 2017
54. "Two phase flow in a wavy core-annular configuration through a vertical pipe Analytical model for pressure drop in upward flow"
    Mohammad Ameri, Nima Tirandaz
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, pp.151-160, 2017
55. "Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis"
    Somayyeh Sadri, Ramin Haghighi Khoshkhoo, Mohammad Ameri
    Energy Equipment and Systems, Vol. 5, pp.429-440, 2017
56. "The efficacy of magnetic field on the thermal behavior of MnFe2O4 nanofluid as a functional fluid through an open-cell metal foam tube"
    , Mohammad Ameri, Alibak Kasaeian
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, pp.539-547, 2017
57. "Thermal performance of nanofluids in metal foam tube Thermal dispersion model incorporating heterogeneous distribution of nanoparticles"
    Mohammad Ameri, Mohammad Amani, Pouria Amani
    ADVANCED POWDER TECHNOLOGY, Vol. 28, pp.2747-2755, 2017
58. "The optimal design and 4E analysis of double pressure HRSG utilizing steam injection for Damavand power plant"
    Hamid Mokhtari, Hossein Ahmadisedigh, Mohammad Ameri
    ENERGY, pp.399-413, 2017
59. "Investigating the convection heat transfer of Fe3O4 nanofluid in a porous metal foam tube under constant magnetic field"
    Mohammad Amani, Mohammad Ameri, Alibakhsh Kasaeian
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol. 82, pp.439-449, 2017
60. "The Experimental Study of Convection Heat Transfer Characteristics and Pressure Drop of Magnetite Nanofluid in a Porous Metal Foam Tube"
    Mohammad Amani, Mohammad Ameri, Alibakhsh Kasaeian
    TRANSPORT IN POROUS MEDIA, pp.1-16, 2017
61. "Multi-objective optimization of MED-TVC-RO hybrid desalination systembased on the irreversibility concept"
    Somayyeh Sadri, Mohammad Ameri, Ramin Haghighi Khoshkhoo
    DESALINATION, pp.97-108, 2017
62. "Multi objective optimization of reverse osmosis desalination plant with exergy approach"
    Somayyeh Sadri, Ramin Haghighi Khoshkhoo, Mohammad Ameri
    Journal of Mechanical Science and Technology, Vol. 10, pp.4807-4814, 2016
63. "A novel configuration of reverse osmosis humidification dehumidification and flat plate collector Modeling and exergy analysis"
    Mohammad Ameri, Mahyar Seyd Eshaghi
    APPLIED THERMAL ENGINEERING, Vol. 103, pp.855-873, 2016
64. "Energy Exergy Exergoeconomic and Environmental (4E)Optimization of a Large Steam Power Plant A Case Study"
    Mohammad Ameri, Hamid Mokhtari,
    Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. 40, pp.11-20, 2016
65. "Performance assessment and multi-objective optimization of an integrated organic Rankine cycle and multi-effect desalination system"
    Mohammad Ameri, Mohammad Jorjani
    DESALINATION, Vol. 392, pp.34-45, 2016
66. "Power and Fresh Water Production by Solar Energy Fuel Cell and Reverse Osmosis Desalination"
    Mohammad Ameri, Mojtaba Yoosefi
    Journal of Renewable Energy and Environment, Vol. 3, pp.25-34, 2016
67. "Optimal design and operation of district heating and cooling networks with CCHP systems in a residential complex"
    Mohammad Ameri, Zahed Besharati
    ENERGY AND BUILDINGS, Vol. 110, pp.1-38, 2016
68. "Design and optimization of a compressed air energy storage (CAES) power plant by implementing genetic algorithm"
    SeyedReza Shamshirgaran, Mohammad Ameri, ,
    Mechanics and Industry, Vol. 109, pp.1-8, 2015
69. "The CFD Modeling of Heat Recovery Steam Generator Inlet Duct"
    Mohammad Ameri, Farnaz Jazini Darcheh
    The International Journal of Energy Engineering, Vol. 3, pp.74-79, 2013
70. "Enhancing the efficiency of crude oil transportation pipeline a novel approach"
    Mohammad Ameri, Mahdi Asgari
    International Journal of Exergy, Vol. 13, pp.523-542, 2013
71. "Exergy and exergo-economic based analysis of a gas turbine power generation system"
    Ali Moosa farash, Mohammad Ameri
    Journal of Power Technologies, Vol. 1, pp.45-52, 2013
72. "Thermodynamic modeling and second law based performance analysis of a gas turbine power plant (exergy and exergoeconomic analysis)"
    Mohammad Ameri,
    Journal of Power Technologies, Vol. 92, pp.183-191, 2012
73. "Comparative analysis of the performance of a dual-fuel internal combustion engine for CNG and gasoline fuels"
    Mohammad Ameri, Farzad Kia Ahmadi Delijani,
    Journal of Power Technologies, Vol. 92, pp.214-226, 2012
74. "Simulation of an atmospheric SOFC and gas turbine hybrid system using Aspen Plus software"
    Mohammad Ameri,
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol. 37, pp.412-425, 2011
75. "V94.2 Gas Turbine Thermodynamic Modeling for Estimation of Power Gained by Fog System in Iran Power Plants"
    Mohammad Ameri, Behnam Tahvildar
    The International Journal of Energy Engineering, Vol. 1, pp.33-43, 2011
76. "بررسی عددی ترکیب روشهای پارامترسازی هندسی سوییپ، لین، دایهدرال و خم انتهایی در بهینه سازی پره های روتور و استاتور یک کمپرسور محوری گذرصوتی"
    شهریار شریفی، امین رسام، محمد عامری
    مهندسی مکانیک، نسخه 30، صفحات:25-40، 1400
77. "مروری بر فعالیتهای گرد و غبار در ایران و پارامترهای موثر بر نشست گرد و غبار بر سطح پنلهای فتوولتاییک"
    اصلان غلامی، محمد عامری، مجید زندی، رقیه گوگ ساز قوچانی
    انرژی های تجدیدپذیر و نو، نسخه 8، صفحات:146-158، 1400
78. "بررسی کارایی برج خنک کن خشک هیبریدی با جاگذاری ACC در داخل برج خنک کننده هلر"
    حسل قره بایی، علی جهانگیری، محمد عامری
    مهندسی مکانیک مدرس، نسخه 21، صفحات:441-452، 1400
79. "بررسی عددی انتقال حرارت و تولید توان الکتریکی ترکیب مولدهای ترموالکتریک با مبدل هیبرید فتوولتائیک-ترموالکتریک در یک حفره جاذب خورشیدی"
    محمد عامری، امید فرهنگیان مرندی
    نشریه پژوهشی مهندسی مکانیک ایران، نسخه 21، صفحات:29-55، 1398
80. "مروری بر روش های حذف گرد و غبار از سطح پنل های فتوولتاییک"
    اصلان غلامی، شهاب اسلامی، آرین تاجیک، محمد عامری، رقیه گوگ ساز قوچانی، مجید زندی
    مهندسی مکانیک شریف، نسخه 35-3، صفحات:117-127، 1398
81. "مروری بر اثر گرد و غبار بر عملکرد پنل های فتوولتاییک"
    اصلان غلامی، شهاب اسلامی، آرین تاجیک، محمد عامری، رقیه گوگ ساز قوچانی، مجید زندی
    کیفیت و بهره وری صنعت برق ایران، نسخه 8، صفحات:93-102، 1398
82. "بهینه سازی عملکرد واحد آب شیرین کن جزیره قشم با استفاده از گرمای اتلافی به کمک بویلر بازیاب"
    سمیه صدری، محمد عامری، رامین حقیقی خوشخو
    مهندسی مکانیک دانشگاه تبریز، نسخه 46، صفحات:139-145، 1395
83. "بهینه سازی چند هدفی نیروگاه زمین گرمایی با مبادله کن گرمایی هم محور"
    محمد عامری، حمید مختاری
    مهندسی مکانیک دانشگاه تبریز، نسخه 45 (1)، صفحات:69-73، 1394
84. "آنالیز اگزرژی، اگزرژی اقتصادی و اثرات زیست محیطی به همراه بهینه سازی چندهدفه سیکل ترکیبی دماوند"
    محمد عامری، حمید مختاری
    مکانیک سازه ها و شاره ها، نسخه 5، صفحات:303-328، 1394

مقالات علمی ارائه شده در همایش‌ها

1. "THECHNICAL ASSESSMET OF CHP SYSTEM INTEGRATED WITH CARBON CAPTURE AND UTILIZATION TECHNOLOGY"
   Mohammad Ameri, Ehsan Akrami, Seyedeh Pegah Lari
   11th Global Conference on Global Warming (GCGW - 2023), pp.1-4, 2023
2. "OPTIMIZATION AND DEVELOPMENT OF A WATER-ENERGY-CARBON NEXUS MODEL: A TECHNO-ECONOMIC ANALYSIS"
   Leila Sasani gargari, Fatemeh Joda, Mohammad Ameri
   11th Global Conference on Global Warming (GCGW - 2023), pp.2-6, 2023
3. "ENERGY EFFICIENCY AND SOLAR ENERGY IMPELIMANTATION OPPORTUNITIES FOR DAIRY FARMS"
   Mohammad Ameri, Ali Minoofar, Ashkan Gholami, Aslan Gholami, Shahab Eslami, Majid ZANDI
   11th Global Conference on Global Warming (GCGW - 2023), pp.3-6, 2023
4. "PHASE CHANGE ENHANCEMENT IN LATENT ENERGY STORAGE SYSTEMS EQUIPPED WITH FULL AND SEGMENTED RADIAL FINS"
   Ali Moradian, Mohammad Ameri, Sahand Majidi
   2nd World Energy Storage Conference (WESC-2022), 2022
5. "EXPERIMENTAL INVESTIGATION OF LI-ION BATTERY THERMAL MANAGEMENT BASED ON THE LIQUID-VAPOR PHASE CHANGE IN DIFFERENT MODES OF HEAT TRANSFER WITH THE ENVIRONMENT"
   Majid Goodarzi, Mohammad Ameri, Hamid Jannesari Ladani
   2nd World Energy Storage Conference (WESC-2022), pp.1-4, 2022
6. ""
   Mojtaba Sedaghat, Ali Jahangiri, Mohammad Ameri
   , 2021
7. ""
   Farzad Asadi, Ali Jahangiri, Mohammad Ameri, Ali Saedi
   , 2021
8. ""
   Hesel Gharehbaei, Ali Jahangiri, Mohammad Ameri
   28th Annual International Conference of Iranian Society of Mechanical Engineering- ISME 2020, 2020
9. ""
   Atefeh Sharif, Ali Jahangiri, Mohammad Ameri
   28th Annual International Conference of Iranian Society of Mechanical Engineering- ISME 2020, 2020
10. "DUST ACCUMULATION ONPHOTOVOLTAIC MODULES: A REVIEW ON THE EFFECTIVE PARAMETERS"
    Mohammad Ameri, Aslan Gholami, Majid ZANDI, Roghayeh Gavagsaz-ghoachani
    5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, 17-19 DECEMBER 2019, JOINT CONFERENCE OF YTU AND ASHRAE, pp.1-11, 2019
11. "A NOVEL HIGH EFFICIENCY SUPERSONIC NOZZLE DESIGN FOR APPLICATION IN STEAM JET EJECTOR WITH SUPERIOR MIXING PROPERTIES"
    Mohammad Ameri, Saeed Akbarnejad
    5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, 17-19 DECEMBER 2019, JOINT CONFERENCE OF YTU AND ASHRAE, 2019
12. "INVESTIGATION OF EFFECTIVE PASSIVE ENERGY TECHNIQUES IN IRANIAN TRADITIONAL ARCHITECTURE"
    Mohammad Ameri, Amir Ameri
    5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, 17-19 DECEMBER 2019, JOINT CONFERENCE OF YTU AND ASHRAE, pp.455-466, 2019
13. "ZERO ENERGY BUILDING WITH THE FUTURISTIC APPROACH AND DECREASING OF THE POLLUTION"
    Arian Gerami, Mohammad Ameri
    4th International Conference on Advances in Mechanical Engineering 2018, pp.13-19, 2018
14. "INVESTIGATION OF APPLIED METHODS OF USING PASSIVE ENERGY IN IRANIAN TRADITIONAL URBAN DESIGN, CASE STUDY OF KASHAN"
    Yasaman Gholami, Aslan Gholami, Mohammad Ameri, Majid ZANDI
    4th International Conference on Advances in Mechanical Engineering 2018, pp.3-12, 2018
15. "Flow and thermal performance analysis of nanofluid in annular tube filled with porous material using Euler-Lagrange approach"
    Arezoo Almasi Sorkhe Mehrai, Mohammad Ameri
    INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING 2017, pp.197-207, 2017
16. "CFD MODELING OF WATER FLOW BOILING WITH THE CONSIDERATION OF BUBBLE DYNAMICS AND ITS EFFECTS ON HEAT TRANSFER PREDICTION"
    Mohammad Ameri,
    INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING 2017, pp.126-138, 2017
17. "HEAT TRANSFER ANALYSIS OF A SOLAR THERMOELECTRIC GENERATOR CAVITY RECEIVER"
    Omid Farhangian Marandi, Mohammad Ameri, Behrooz Adelshahian
    INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING 2017, pp.180-185, 2017
18. "Study of power and fresh water production using solar photovoltaic and reverse osmosis"
    Mohammad Ameri, Mojtaba Yoosefi
    INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE 2017, No 1 , pp.98-114, 2017
19. "Application of Renewable Energies for Optimal Electricity Generation in a Building in Khodabandeh Zanjan"
    Mohammad Ameri, Elnaz Hariri
    2016 International Congress on Recent Development in Engineering and Technology (RDET-16), pp.5-10, 2016
20. "A Feasibility Study for Electricity Generation by Anaerobic Digestion of Wastewater Sludge"
    Mohammad Ameri, Alireza Bafandeh
    2nd International Conference on Electrical Mechanical and Mechatronics Engineering (ICE2015), 2015
21. "The Application of a Microgrid Considering Wind Generation"
    Mohammad Ameri,
    ASME 2015 9th International Conference on Energy Sustainability, No 2 , 2015
22. "Study of Water Production from Humid Air by Application of Wind Turbine"
    Mohammad Ameri, Ahmadreza Farshad
    The First Joint Iran Germany Conference on Renewable Energy IGCRE 2014, No 1 , pp.1-5, 2014
23. "Black Liquor Recovery Boiler Performance Improving Through Exergy and Energy Analysis"
    Mohammad Ameri, Poria Oruji, Nasim Hamzeloo
    International conference utility (ICUE2014) on Green Energy for sustainable development, No 61 , pp.142-145, 2014
24. "The Effect of Using CHP Systems in Energy Utilization and Reduction of Greenhouse Gases in a Pulp and Paper mill in Iran"
    Mohammad Ameri, Yousef HadjebnAli, Poria Oruji
    International conference utility (ICUE2014) on Green Energy for sustainable development, pp.72-76, 2014
25. "Optimization of a Hybrid Power Generation System Wind Turbine and Gas Engine"
    Mohammad Ameri, Hamidreza Tork
    4th International Conference on Sustainable Energy and Environment (SEE2011), 2012
26. "Feasibility Study of a CCHP System using Micro-turbine and Absorption Chiller A Case Study"
    Mohammad Ameri, Poria Oruji,
    4th International Conference on Sustainable Energy and Environment (SEE2011), pp.1-6, 2012
27. "Optimal Sizing Operation and Sensitivity Analysis of a CCHP System based on Fuel Cell Prime Mover for a Typical Building"
    Mohammad Ameri, Mohammad Sadegh Ghazi Zadeh
    4th International Conference on Sustainable Energy and Environment (SEE2011), pp.1-8, 2012
28. "Two Dimensional PEM Fuel Cell Modeling at Different Operation Voltages"
    Mohammad Ameri, Poria Oruji
    World Renewable Energy Congress 2011 (WREC2011), pp.1166-1173, 2011
29. "Energy and exergy analysis and optimization of a double flash power plant for Meshkin Shahr region"
    Mohammad Ameri,
    World Renewable Energy Congress 2011 (WREC2011), pp.1297-1304, 2011
30. "Application of CHP Gas Engine Plant for a Detergent Factory Energy and Environmental Aspects"
    Mohammad Ameri, Seyed Mohammadali Afsharzadeh
    World Renewable Energy Congress 2011 (WREC2011), pp.3106-3112, 2011
31. "Experimental analysis of subcooled flow boiling of Al2O3/H2O and CuO/H2O in a metal foam tube"
    شهرام عزیزی فر، محمد عامری
    سی و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران و نهمین همایش صنعت نیروگاهی ایران، 1402
32. "Experimental Investigation of Single Evaporator Cooling System Using Two Capillary Tubes and Microchannel Coil Technology"
    نادر علی حسینی، محمد عامری، علی جهانگیری
    سی و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران و نهمین همایش صنعت نیروگاهی ایران، صفحات:1-6، 1402
33. "بررسی تجربی و عددی افزایش نرخ انتقال حرارت درون یک محفظه بسته همراه با هیتر"
    مجتبی صداقت، علی جهانگیری، محمد عامری
    بیست و نهمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران و هشتمین همایش صنعت نیروگاه های حرارتی، 1400
34. "تحلیل ترمودینامیکی و اقتصادی استفاده از دیوار بادشکن در برج خنک کن خشک"
    عاطفه شریف، حسل قره بایی، رضا علیزاده خنسلو، محمد عامری، علی جهانگیری، محمد ابراهیم سربندی فراهانی، الهام روشنی مقدم
    سی و چهارمین کنفرانس بین المللی برق، 1398
35. "بررسی و مقایسه ترمواگزرژی نیروگاه زمین گرمایی آنی تک مرحله ای و دو مرحله ای مشکین شهر"
    رضا علیزاده خنسلو، محمد عامری، علی جهانگیری
    بیست و هفتمین کنفرانس سالانه بین المللی مهندسان مکانیک ایران، صفحات:1-6، 1398
36. "بررسی ابعاد هندسی مانع بر کارایی پیل سوختی پلیمری با میدان شارش مارپیچی"
    علی اکبر ابراهیم زاده، ایمان خزایی، احمد فصیح فر، محمد عامری
    سومین کنفرانس انتقال حرارت و جرم ایران، صفحات:1-5، 1396
37. "امکان سنجی استفاده از CCHP در یک شهرک مسکونی جهت کاهش آلاینده های زیست محیطی"
    زاهد بشارتی، محمد عامری، مهرداد ستایش نظر
    سومین سمپوزیوم بین المللی مهندسی محیط زیست و منابع آب، 1394
38. "Evaluation of Wind Energy Potential in Province of Zanjan"
    محمد عامری، الناز حریری، فرناز صاحبی وایگان
    کنفرانس بین المللی علوم، مهندسی و فناوری های محیط زیست (CESET)، صفحات:1-10، 1394
39. "Simulation of a new hybrid solar and organic cycle as a combined cooling heat and power (CCHP) unit in off design condition"
    حمید مختاری، محمد عامری
    کنفرانس بین المللی علوم، مهندسی و فناوری های محیط زیست (CESET)، صفحات:1-12، 1394
40. "امکان سنجی فنی واقتصادی تولید آب با استفاده از توربین بادی و هوای مرطوب در سواحل جنوبی ایران"
    احمدرضا فرشاد، محمد عامری
    کنفرانس بین المللی علوم، مهندسی و فناوری های محیط زیست (CESET)، 1394
41. "مطالعه پارامترهای موثر بر ضریب انتقال حرارت جابجایی در نانو سیالات"
    سیدمصطفی موسوی عبدالهی، احسان غلامیان، محمد عامری
    اولین همایش داخلی مهندسی مکانیک دانشگاه آزاد اسلامی، صفحات:1-8، 1393
42. "تکنولژیهای نوین در صرفه جویی انرژی مبانی سیستمهای CHP"
    محمد عامری
    گردهمایی انجمن مهندسان مکانیک ایران، 1393
43. "بهینه سازی مبدل حرارتی فشرده با استفاده از الگوریتم ژنتیک، با رویکرد کمینه سازی تولید آنتروپی"
    رامین حقیقی خوشخو، محمد عامری، سمیه صدری
    دهمین همایش بین المللی انرژی، شماره 3 ، صفحات:1-6، 1393
44. "روش شناسی مدل سازی تقاضای انرژی بخش حمل ونقل توسط برآورد سهم بازار خوروها"
    علیرضا حیدری، محمدحسین رمضانی، محمد عامری
    دهمین همایش بین المللی انرژی، صفحات:1-10، 1393
45. "طراحی بهینه سیکل جدید هیبریدی نیروگاه زمین گرمایی و سیکل ترکیبی"
    حمید مختاری، محمد عامری
    دهمین همایش بین المللی انرژی، شماره 1 ، صفحات:1-9، 1393
46. "A comparison between solar field and supplementary firing for generating additional power in solar hybrid power plant"
    محمد عامری، سیدحمیدرضا موسوی
    پنچمین کنفرانس صنعت نیروگاه های حرارتی، شماره 1 ، صفحات:1-5، 1393
47. "بهینه سازی مدل MILP در طراحی و بهره برداری از سیستم تولید همزمان یک شهرک مسکونی با هدف کاهش مصرف انرژی"
    محمد عامری، زاهد بشارتی، مهرداد ستایش نظر
    دومین همایش ملی انرژی های نو و پاک، 1392
48. "بررسی عملکرد مولد همزمان برق و حرارت (CHP) برپایه پیل سوختی اکسید جامد (SOFC) مطالعه موردی"
    محمد عامری، علیرضا حیدری، علی امید بیگی
    دومین کنفرانس ملی هیدروژن و پیل سوختی، صفحات:1-7، 1391